User guide

4
Once the installation is finished, the program update files will begin installation.
After files are installed, the remote surveillance icon is placed on the desktop.
Remote Surveillance Program Operation
Before the remote program can be set up, user must log-in with default user ID and password. The default
user ID is system, and the password is manager.
Click the log-in icon located in the main screen
system
manager
Before the first user is setup, you must log-in
to the system. The default user Id is system and
Password is manager. After a user is setup in the
user registration, the default user ID and pass-
word will not work. To begin using the remote
software enter the user ID and password. Click
confirm.
Important Note:
The first step to setting up the remote software is to add a user or users who will be running the
remote program. The next step is to register the DVRs that the software will be connecting to.
Before going any further, some explanation is necessary between registering users in the user
registration window and registering DVRs in the site registration window. When registering users,
you are only allowing them to use the remote program. This user name and password have no
effect on the rights and permissions of the DVRs you are connecting to. This is done when regis-
tering the DVRs in the site registration window. It is in the site registration window that the user is
asked to give the user name and password for logging into the DVR. It is this user name that
determines what permissions users of this program will have when connecting to the DVR.