User guide

24
Two Way Auido Communication
This function establishes two way communication between the remote user and the DVR. When two
way audio communication is established, the icon will turn yellow. Click again to turn off two way audio
communication
Remote Emergency Record
The remote emergency record function will turn on Emergency Record for all cameras at the DVR
site. Clicking the remote emergency record icon will act the same as if you were at the DVR site and
clicked the emergency record button. Click again to stop emergency recording at the DVR site. This
function will not record at the local user’s machine, but at the DVR site. Please Note: Once Remote
Emergency Record has been turned on it will continue to record at the DVR site until the button is
clicked again. If the user exits the remote software without turning off Remote Emergency
Record, the DVR will continue to record in Emergency Record mode. If the DVR is in Emergency
Record Mode, the Remote Emergency record icon will be yellow. The E symbol will not appear in
the camera image for Remote Emergency Record; this symbol indicates local Emergency Record
only.
Rec symbol denotes local recording only. To
begin local recording click the Rec button
.
Yellow icon indicates that Emergency
Record function is turned on at the DVR
site. Emergency Record data is being
saved at the DVR site.