User guide

19
Control Window
The control window has three functions: PTZ Control, which allows users connected to a PTZ camera to
control it, System Control, which allows users to control relays and make system changes to the remote
DVR, and Search Control, which allows users to search and playback video recorded on remote DVRs.
This section will look at each of these functions.
PTZ Control
Allows the user to control PTZ cameras connected to the remote DVR. Image below shows the
functions available with PTZ control. Not all features can be used on all PTZ cameras. The camera
must support the function.
camera channel
pan/tilt
light on/off iris control auto pan
zoom
focus
iris
aux
call preset auto touring
The following functions are available to control PTZ cameras. Not every function may be available
depending on if the particular PTZ camera supports the various function.
Camera Channel - Informs the user of the camera channel selected. User must select channel with
PTZ camera for PTZ function to work.
Pan/Tilt - Controls the PTZ camera’s direction (up, down, left, right, diagonal).
Light On/Off - Controls the PTZ camera light on or off.
Iris Control - Controls the camera’s iris.
Auto Pan - Controls auto panning, on/off.
Zoom - Controls the zoom feature of the PTZ camera.
Focus - Controls the focusing in/out of the PTZ camera.
Iris - Controls the camera iris, in/out.
Aux - Controls any external equipment attached to the PTZ camera (heater, blower).
Call Preset - Use this to call a preset.
Auto Touring - Used to call a preset tour.