Operating instructions

7-23
Network (Web Server Setup)
e DVR has the ability to act as a web server for remote connection via internet web browser. is menu
will set up the DVR to act as a web server. Click the enable box to turn on the web server function. Enter a
port number for the web server (default is port 80). Now the DVR will act as a web server. All controls will
be downloaded when the user connects to the DVR the first time. Please be sure to set the remote computer’s
internet browser security to allow unsigned active X controls to be downloaded and installed. Failure to do
this will cause the web server to fail. Please refer to the Web browser soware manual for more information.
Click check box
to enable web
server function
Web port
Setting the Network Port
e main Network Menu has a section for changing the soware port. e default network port is set to 7301
and should not be changed except by network administrator. If you change the default port you must enter
the new port number in the network client soware as well.
Network soware port