Operating instructions

7-22
TCP/IP Information
When using a Static IP, you need to provide the DVR with the IP address, subnet mask, Gateway, and DNS
number. ese must be obtained from your network administrator or your internet service provider. If you
are using DHCP or xDSL connection, this information will be obtained automatically by the system. e im-
age below shows the TCP/IP information.
IP address
Subnet Mask
Default Gateway
DNS number
Mac Address
Network (E-Mail Notification)
e system has the ability to send e-mail notification upon a sensor, or video loss event. is menu is the
setup window for setting up the sender and receiver E-Mail account information. e image below shows
the Network (E-Mail Notification) menu.
Enable E-Mail
Notification
Receiver
Sender
To set up the e-mail notification, enter your POP Server name in the sender box. Enter the person’s e-mail
address that you want to receive the e-mail notification in the receiver box.
Please note: You must be set up and communicating on a network for the e-mail notification to work.