Operating instructions
7-5
Time Sync.
e Time Sync function allows one DVR to act as a time server to sync all Embedded DVR’s time to
be the same. e options in automatic Sync. require the IP address of another embedded unit set to
run as the time server.
Time Sync set screen
System (Disk Manager)
e disk manager screen contains information about the drives connected to your DVR. is
includes any USB or CD-RW drives attached. is screen also contains the HDD format function as
well as a HDD chkdsk utility and Create VDB function.
• Check HDD - To check the total HDD size and amount of Disk space free, place a check mark in
box beside the drive you want. e system will display the type of format internal or windows, total
HDD size in GB, the amount of free space in GB, the type of drive and if it is used for recording or
Backup.
• Remove - Use the remove button to un-dock any USB devices before removing from the USB port.
• Format - Use to format a HDD using the DVR’s internal format system. is system cannot be read
by windows. Any backup created with this format must use the DVR’s remote player soware to be
able to read this disk.
• ChkDsk - is is a HDD utility to check your HDD to see if it is functioning properly.
• Create...VDB - is is used to format a disk and prepare it for recording video. Use this function
with extreme caution as this will erase all recorded video from the hard disk.
System Disk Manager Screen.