Operating instructions

4-4
Front Panel Functions
e image below details the functions of the front panel. ese functions are the same for the remote control-
ler.
1
2 3 4 5 6 7 8
14131211109
1) Power button - Turns the unit on and off.
2) Enter and cursor movement control - Moves the on screen cursor in the direction of the arrow.
Pressing the center button selects desired function.
3) Menu button - When pressed this button will bring up the on screen pop up menu.
4) PTZ button - Changes the selected camera into PTZ mode.
5) Search button - When pressed brings up the search menu.
6) Seq. button - When pressed this will put the on screen cameras into sequence mode. Pressing it
again will take the on screen cameras out of sequence mode.
7) Mode button - When pressed this will change the on screen camera display. Please see screen
display section for screen descriptions.
8) Jog Shuttle - When in playback mode turning the jog shuttle a small amount to the right will
increase the playback speed. Continued turning to the right will speed up playback. e different
playback speeds are 2,4,16,32,64,128,256 times normal speed. Turning the jog shuttle a small
amount to the le will increase the backward playback speed. Continued turning to the le will
speed up backward playback. e different backward playback speeds are -2,-4,-16,-32,-64,-128,
-256 times normal speed.
9) ESC. button - When pressed will back out of a command.
10) Play Backward/Zoom in button - When in playback mode this button will play recorded video
backward. When in PTZ mode it is used to zoom the camera in.
11) Play Forward/Zoom Out button - When in playback mode this button will play recorded video
forward. When in PTZ mode it is used to zoom the camera out.
12) Pause button - When in playback mode this button will pause the playback of video.
13) Emergency Record button - When pressed this button will record all cameras in continuous
mode until it is pressed again. is will take precedence over any setting you have set up in the
system.
14) USB ports - USB ports can be used to connect external USB devices, such as a mouse or external
HDD to the DVR.