Operating instructions

4-1
Controlling the DVR
ere are three ways to control the DVR; using the USB mouse, using the remote controller, or using the
front panel. is section will provide you an overview of the functions used with the remote controller and
the front panel.
Using e Remote Controller.
e remote controller can be used to control the various functions of the DVR. e controller and DVR
come preset to ID 0. If more than one DVR is used at the same location you can set a different ID for each
DVR and controller. See section later in this chapter on how to do this. e following image shows the fea-
tures of the remote controller.
Power Button: Turns DVR on and off
ID button: used to set controller ID
ID set button: Used to
set controller ID
Numeric keypad: used
to input controller ID
Up button: Used to move
the on screen cursor up
Le button: used to move the
on screen cursor to the le
Right button: Used to move
on screen cursor to the right
Down button: Used to move
the on screen cursor down
Esc button: Used to back out of a command
Enter button: Used to select a command
Zoom Int button: Used to zoom a PTZ camera
Mode button: Used to select
the screen display mode
Record button
Pause button
Advance frame forward
Menu button: Brings up the menu screen
Puts the system in PTZ mode
Search button: Used to bring up the search screen
Zoom Out button
Seq button: Used to put DVR in sequence mode
Play backward
Play forward
Play fast backward
Backward one frame
Play fast forward