Operating instructions
3-1
Powering Up e DVR For e First Time
e default settings of the 4100 series DVR will allow the DVR to begin recording in continuous mode aer
all the hardware has been installed and the unit is powered on. e steps below will walk you through setting
the date and time for your unit.
Aer making all connections to the DVR, turn on the DVR by pushing the on/off button located on the front
panel of the DVR. e system will go through a series of self diagnostics aer which, will bring up the main
screen. If you have not connected cameras to all the ports, you will receive a loss signal warning. Click OK to
move past the warning screen. See image below.
Click Yes to remove message from screen
Default User Name and Password
Click the right mouse button or press the menu button on the front panel or remote controller. is will
bring up the log in screen. e system default user is administrator and the password is 1234. Use the mouse
to click the password 1 2 3 4 and click OK. See image below.