- Crest Audio, Inc DJ Equipment User Manual

Front Panel Features
Stereo EQ
The Stereo Input channel has two parallel EQ circuits that are controlled by the same set
of knobs.
High Frequency—HF
Boost / Cut 15 dB boost and cut. Shelving @ 12 kHz.
High Mid—HM
Frequency Continuously sweepable between 400 Hz and 8 kHz.
Boost / Cut 15 dB boost and cut. Bell curve with a BW of approx 1.5 octaves.
Low Mid—LM
Frequency Continuously sweepable between 100 Hz and 2 kHz.
Boost / Cut 15dB boost and cut. Bell curve with a BW of approx 1.5 octaves.
Low Frequency—LM
Boost / Cut 15 dB boost and cut. Shelving @ 80 Hz.
EQ On
Equalizer is OFF. The equalizer circuitry is bypassed.
Equalizer is ON. This switch is used to activate the EQ section and can be used to
make A/B comparisons between "flat" and EQ'd signals.
Stereo Input channel
1
p. 25