Owner`s manual

p.25

Stereo Input channel

Rear panel features

48 V Phantom power

48 volts DC is applied to pins 2 and 3 on the mic-input XLRconnectors.

This option is used with condenser microphones and active direct boxes that

require an external DC voltage (phantom power ) in order to operate.

Line INPUTjacks - Left and Right

Line-level signals, balanced or unbalanced, may be brought into the

input channel through this jack. The LINE INPUT switch must be pressed for

these jack to be active.

MIC INPUT jack - Left and Right

These balanced female XLRs accept low-impedance microphone signals, or

line-level signals, depending on the position of the LINEINPUTswitch on the

front panel.