Owner`s manual

Bus assignment features
The bus assignment section offers considerable flexibility for creating what even-
tually becomes the main output mix. Two stereo subgroups are available for creat-
ing submixes or separate stereo mixes. When the channel is being used as a
stereo input, Left/Right, Groups 1 & 2 Groups 3/4 bus assignments are configured
as true stereo pairs. Bus assignments are derived post-fader, post-eq, and post-
mute.
BAL control
The balance control adjusts the stereo balance for the Group and Left/Right
assignments.
Mono bus assign
The channel is assigned to the MONOmix bus. The Left and Right signals a
are summed to make up the MONO signal. BAL has no affect on MONO
L-R bus assign
The channel is assigned to the Left and Right mix buses.
G 1-2 bus assign
The channel is assigned Sub Groups 1 and 2. Groups 1 and 2 are configured
as a stereo pair. They can also be treated as two discrete mono groups by using
the BAL control as an GROUP 1/2 mix control.
G 3-4 bus assign
The channel is assigned Sub Groups 3 and 4. Groups 4 and 4 are configured
as a stereo pair. They can also be treated as two discrete mono groups by using
the BAL control as an GROUP 3/4 mix control.
Input fader
The fader is the primary level control for signals being sent to any of the consoles
mix buses, The signals affected are the AUX sends selected to be post-fader and
the Mono, L/R, and Groups 1-4.
MUTE
The input channel is muted and the MUTELEDis alluminated. All AUX
feeds and bus assignments are shut off. SOLO is still active.
PK / SIG LED indicator
This two-color(green & red) LED is used to monitor both the channel’s Left
and Right signal levels. Signal present (green) is monitored pre-fader. Peak (red ) is
monitored at the preamp and both before & after the fader.
PFL
PFL -Pre fader listen. This button routes the channel’s signal to the PFL bus
for monitoring through headphones or in the control room. The Peak (red) LED
is illuminated to show PFLstatus.Since the SOLO bus is stereo, stereo image is
preserved.
p.23
Stereo Input channel
2