Hardware manual

NexSys v. 3.0 Crest Audio Inc.
Plan Inventory Window
The plan inventory serves as a good repository from which to drag and drop devices to log-
ically-organized groups. It is also a convenient place from which to set up each device in
the system.
6.6 Device Setup
A device may be configured by opening its setup dialog. This task can be accomplished in
one of three ways:
• In the process of creating a new device, Device Setup is automatically called.
• After having selected a device in the Plan Inventory or a group, select Device
| Setup from the menu.
• Right click on a selected device and select Device Setup from the
pop-up menu (below).
Device Setup Menu
A Cancel button appears on all Device Setup dialogs. Pressing it discards all setup changes
made to the device. Two parameters are common to all devices: the name of the device and
its address. These items are covered first. More specialized setups are then covered on a
device by device basis.
Changing the Device’s Name
You can enter a device’s name by typing in the Name combo-box. By pressing the down
arrow in the combo-box, you can choose a name from among the last few entered. This is
especially useful for repetitive names where perhaps only a single character is different.
Double-click here to display
the planwide amplifier
control panel.
Double-click here to display
the planwide sequential
turn-on control panel.
Double-click on any device
to open its control panel.
Right-click on any device to
pop-up a menu for device
setup or to open control
panels related to the
selected device.
Page 6.4 Software Manual