Specifications

Output Specifications
* 0 dBu=0.775V (RSM)
Nom./Min. Output Level dBu*
Output Load Balance/ Connector
Impedance Nom. Max. Unbalanced
(Ohms)
1/4"
TS:
2 k 0 +22 Unbalanced Tip (+)
Master L/R Sleeve-Ground
XLR:
2 k/600 +4 +26/+24 Balanced Pin 1 Ground
Pin 2 (+)
Pin 3 (-)
XLR:
2 k/600 +4 +26/+24 Balanced Pin 1 Ground
Mono Pin 2 (+)
Pin 3 (-)
Unbalanced 1/4" TS:
Group 1 — 6 2 k 0 +22 Tip (+)
Mix Sleeve Ground
1/4"
TS:
2 k 0 +22 Unbalanced Tip (+)
Aux 1-2 — Sleeve-Ground
XLR:
2 k/600 +4 +26/+24 Balanced Pin 1 Ground
Pin 2 (+)
Pin 3 (-)
1/4"
TS:
Aux 3 — 6 2 k 0 +22 Unbalanced Tip (+)
Sleeve Ground
1/4" TS:
Control Room 10 k 0 +22 Unbalanced Tip (+)
Sleeve Ground
1/4" TRS:
Headphones 8 -14 -8 Unbalanced Tip - Left
(+22 -No load) Ring - Right
Sleeve Ground
26
Gain:
Mic Input to Channel Insert Send: Variable +10 dB to +50 dB
Mic Input to Channel Direct Output (Ch. 1 to 8) Variable +20 dB to +60 dB
Mic Input to Group 1 to 4 or L/R out 70 dB
Mic Input to Master L/R through Group 1 to 4 80 dB
Frequency Response:
Mic Input to L/R Master 20 Hz to 20 kHz (+0, -1 dB) @ Max. Gain
20 Hz to 20 kHz (±0.5 dB) @ Min. Gain
Phase Response:
Mic Input to L/R Master ±30 deg. (20 Hz to 20 kHz)
Total Harmonic Distortion (THD):
0.01%: 20 Hz ~ 20 kHz, Mic Input to L/R Master outs @ nominal level (22 Hz to 80 kHz BW)
0.005%: 1 kHz, Mic Input to L/R Master outs @ nominal level (22 Hz to 22 kHz BW)
Hum and Noise
EIN -128 dBu (Terminated 150 Ohms)