User`s manual

229
4. Error message
1) There is no connection between PC and PC Interface Unit.
2) There is no connection between dive computer and PC
interface unit.
or Dive computer is not in PC mode
3) Different dive computer are installed to PC interface unit
end….
Related topics:
• 2.4. - Parameters setting
• 2.5.2. - Date and time adjustment
• 2.7.3 - Units of measure setting
• 4. - Surface interval
• 4.2. - Dive logbook
• 4.3. - Dive historic memory
• 4.4. - Dive profile
5. - CARE AND MAINTENANCE.
Cressi-sub is designed to operate in extreme condi-
tions with extensive underwater use.
You should always remember though that it is a precision
instrument deserving appropriate care. Please avoid any vio-
lent shock, protect it from extreme heat sources, always
wash it in fresh water after using, dry it carefully, never store it
wet, avoid any contact with heavy equipment, like diving
cylinders.
WARNING: avoid any contact with solvents or chemicals
of any kind. Never use compressed air to dry the computer.
Do not use the computer in hyperbaric cabins if it is not
completely under water.
WARNING: Do not open the instrument’s cage or try to
open and remove its buttons or its pressure sensor.
NOTE: always wash the instrument in fresh water after
using.
The buttons don not need any particular care: never grease
them with oil or spray of any kind.
ENGLISH
EDY.qxd:EDY Manuale2006-2.qxd 20-06-2008 11:52 Pagina 229