User`s manual

226

The (HIST) function is able to store up to 599 dives, after which

the counter is reset.

NOTE: it is possible to vary the data stored in the HIST,

function, using the proper interface software (accessory).

Related topics:

• 2.7.2. - Date and time adjustment

• 2.7.3. - Units of measure setting.

• 3.6. - gage (or depth gauge/Timer) program

• 4.5. - Data PC transfer: compatible PC interface.

4.3.3. -

FAEE

program apnoea dive historic memory

Cressi-sub computer is also equipped with a historic

memory for FAEE, program apnoea dives (HIST). To start this

function, depress button A ( ) in sequence until the

(HIST) icon appears on the display of the FAEE program (picture

36). This program supplies information related to:

1 TOTAL number of apnoea dives performed during the day;

2 Maximum depth reached in apnoea dives during the day,

given in meters (m) or feet (ft);

3 Time of the longest apnoea dive performed during the day,

given in minutes and seconds by the icon “MAX DIVE T”

The memory of apnoea dives performed during the day will

be reset automatically at midnight. It is though possible to

reset the apnoea dive historic memory by keeping button C

( ) depressed for about 5-6 seconds: the display

will be flashing and replacing the HIST icon with “CLEA” (pictu-

re 38), until all data stored in the apnoea dive historic memory

have been fully cancelled (picture 39).

Since the frequency of computer’s data adjustment in

the FAEE program (every second), the reset function is especial-

ly important, in order not to fill up the available memory too soon.

NOTE: it is possible to carry out the above procedure only

for the HIST function of computer ’s FAEE program.

NOTE: the apnoea dive historic memory reset does not affect

in any way the data transferring through the PC interface.

EDY.qxd:EDY Manuale2006-2.qxd 20-06-2008 11:52 Pagina 226