User`s manual

225

NOTE: the first apnoea dive of the daily series is noted in

brackets with 1 (meaning dive 1), the second with 2 (dive 2),

and so on.

4 Maximum depth reached during the apnoea dive, given in

m or ft.

5 Dive’s number: the most recent dive’s information is given

first.

To view the second logbook display mode, just depress but-

ton D ( ). The mode’s number 1/3 is replaced by 2/3,

meaning the second of the three available logbook modes

related to the apnoea dive.

This mode supplies the following data (picture 47):

1 Apnoea dive’s starting time (the time at which the compu-

ter has gone below 4 ft., starting the (FAEE) computing pro-

gram);

2 Apnoea dive’s end time (the time at which the computer

has gone above 4 ft.)

3 Apnoea dive’s average depth (AVE) given in m or ft.

4 Apnoea dive’s total time, given in minutes, shown by the

"DIVE T." icon

To revert back to the first display mode, just depress button

C ( ), to view the third logbook display mode, just

depress button D ( ). The mode’s number 2/3 will be

replaced by 3/3, meaning the third and last available mode

related to the apnoea dive, which supplies the following data

(picture 48):

1 Water temperature at the maximum depth, given in °C or °F.

2 Surface interval since the previous apnoea dive given in

minutes (picture 3a) and seconds (picture 3b).

3 Total time of the apnoea dive given in minutes and

seconds, shown by the "DIVE T." icon

To view the display modes related to the previous apnoea

dives, depress button D ( ) again. By keeping the button

depressed, you enter a rapid sequence of the first display

modes related to the previous apnoea dives.

By depressing button C ( ), the display mode will

change, while by keeping it depressed, you will enter a rapid

sequence of the first display modes related to the subseu-

quent apnoea dives.