User`s manual
224
This second mode supplies the following data (picture 45):
1 Dive’s starting time (the time at which the computer has
gone below 4 ft., starting the (“GAGE”) program;
2 Dive’s end time (the time at which the computer has gone
above 4 ft).;
3 Dive’s average depth (AVE) in m or ft.
4 Dive’s total time, given in minutes, shown by the "DIVE T."
icon
To revert back to the first display mode, just depress button
C ( ). To view the third logbook display mode, just
depress button D ( ). The mode’ s number 2/3 is repla-
ced by 3/3, meaning the third and last of the available log-
book modes related to the dive.
It supplies the following data (picture 45):
1 Water temperature at the maximum depth, given in °C or °F.
2 Surface interval since the previous dive, given in hours and
minutes.
To view the previous dives’ modes recorded in the logbook,
depress button D ( ) again. By keeping the button
depressed, you will enter a rapid sequence of the first display
modes related to the previous dives.
By depressing button C ( ), the display mode will
change, while by keeping it depressed you will enter a rapid
sequence of the first display modes related to the subse-
quent dives.
Related topics:
• 2.5. - GAGE (or depth gauge/Timer) program parameters
setting.
• 2.7.2. - Date and time adjustment
• 2.7.3. - Units of measure setting
• 3.6. - GAGE (or depth gauge/Timer) program
• 4.1.2. - Surface interval after a GAGE program
4.2.3. -
FAEE
program logbook
Cressi-sub computer stores data related to the last
apnoea dives conducted in FAEE program: the data are ente-
red every second. To activate this function, while on surface,
depress button A ( ), in sequence, until the (LOG) icon
appears on the display (picture 46).
NOTE: the storage of dives’ time in function FAEE varies as
to the time of apnoea and, although the data sampling fre-
quency is of 1 second, no apnoea dive lasting less than 30
seconds is stored, in order not to fill up the available
memory too soon.
‘s logbook is a multifunction instrument that allows to
view, on three different display modes, a full series of data
related to apnoea dives, starting with the most recent one in
chronological order.
The main display mode (picture 46) shows the (LOG) function,
which is soon replaced by the number of dive and display
mode (1/3 = first of the three available modes related to that
apnoea dive).
It shows the following information:
1
FREE icon
2 Apnoea dive’s year
3 Apnoea dive’s date (month and day) - in brackets the dive’s
number in the daily series
EDY.qxd:EDY Manuale2006-2.qxd 20-06-2008 11:52 Pagina 224