User`s manual

205

plunging, dive time, with a frequency of data sampling (sam-

pling time) of 1 second.

In FAeE program PLAN function is off, and it is possible to set only

a maximum depth and maximum apnoea dive time alarm,

which may be switched on and off by the user: first, set FAEE

program by depressing button A ( ) until the related

menu is visualized (picture 8b FAEE program) and following the

procedures shown in the previous chapters. At this point,

depress button C ( ) in order to select the function

and choose the setting by depressing button D ( ) (pic-

ture 8b - FAEE program).

The following sequence shows the available functions:

Max Depth alarm -> OFF/ON -> FAEE dive time alarm

-> OFF/ON -> FAEE

that is:

• Max Depth alarm (picture 8a-9b) may be switched on

(OFF/ON); it is possible to vary the depth at which it will start

(picture 8b), by depressing button D ( ).

• Free Dive time alarm (picture 29) may be varied and swit-

ched on by depressing button D ( ). It is possible to

switch it off (OFF/ON) (picture 30), by depressing first but-

ton C ( ) then button D ( ).

If the alarms are on (ON), when the dive reaches the maximum

depth and the maximum time set, a sound alarm will start and

the display will flash for three seconds.

The maximum depth value may be varied from 0 to 324,7 ft., by

depressing button D ( ). When the maximum depth has

been set, depress button D ( ) to switch on or off the depth

alarm. The computer is preset on the values of 131 ft. and OFF.

At the end of the dive FAEE program processes the

apnoea dives data using its functions of (LOG) - dive logbook

(chapter 4.2.). (HIST) - dive historic memory (chapter 4.3.) and

(PAOF) - Dive profile (chapter 4.4.). Such functions are specific

for any set program and include a processing memory of

their own which does not affect the computer other

processing programs.

It is possible to reset the daily apnoea memory’s content

(HISTORY), by following the procedures shown in chapter 3.7.2

FAEE program will be memorized in the computer until the

diver changes the program.

Depress button A ( ) for some seconds to revert back

to the normal display (picture 1).