User`s manual
200
2.1. - display and controls.
The computer is equipped with a “
User Friendly
Display System
” ( ) display, which “escorts”
the diver during any operation, allowing a direct dialogue and
an easy understanding of all functions. ’s various pro-
grams start by depressing button A ( ), which is the
system’s key: they are clearly visualized by the alpha-nume-
ric display. Some programs have sub-menus,
which are switched on by depressing buttons C ()
and D ( ) they also allow to change the setting on the
surface, while button B ( ) engages the display back-
illumination.
2.2. - Clock functions.
2.2.1. - Clock display.
‘s clock display is always on, and the related battery
consumption is unnoticeable. It shows, in its central part, the
time in hours and minutes; at the bottom, the seconds; at the
top, the week’s day, the calendar’s month and day (picture 1).
This display stays on until the computer gets into water, and
the previously set program starts up.
Depressing button B engages the display back-illumination,
while keeping button C depressed the time related to a pre-
viously set time zone (DUAL) will be shown (see picture 2).
By depressing button C after a
DIVE, program dive, the display
will show, in its central part, the time related to a previously set
time zone (DUAL), at the top, the surface time and the de-
saturation time besides the “Don’t Fly” icon.
Related topics:
• 2.2.2.- Time zone setting.
• 3.1. - DIVE program
• 4.1.1. - Surface interval after a DIVE program
2.2.2. - Time zone setting.
To set a time zone, please depress button A ( ) in
sequence until the (DUAL) icon appears on ’s
display.
By depressing button C ( ) the time zone starts
flashing, waiting for its setting by respectively depressing but-
ton C ( ) to advance, or button D ( ) to move
back the hour related to the time zone.
Depress button A ( ) for some seconds in order to
return to the normal clock display (picture 1).
AD
C
B
E
EDY.qxd:EDY Manuale2006-2.qxd 20-06-2008 11:51 Pagina 200