Specifications

14
CX Powered By Creo Color Server Technology System Software
Limitations
• If you open the online help or one of the tutorials on the CX print server software, and then
open the workspace, the online help and tutorials are hidden behind the workspace.
• In the Color Set parameter, if you select the None option after having selected one of the color
set options, the parameter doesn’t revert to the default setting.
• If the user disk is full, a message indicating that the job failed in the Process queue appears
without an indication that the user disk is full.
• Xerox Xpresso and SNMP proxies for the Xerox Color 550/560 Printer are not supported.
• The PPD file does not include the entire list of job parameters. To work with all of the options in
the job parameters window, install the Print Driver software.
• Native PDF workflow limitations (Adobe PDF Print Engine):
o The R un Immediately option can’t be used with the native PDF workflow.
o Two native PDF files cannot be processed simultaneously. The APPE R IP and the
CPSI RIP can process files in parallel.
o Native PDF workflow options are not available via the Print Driver software.
o Native PDF workflow supports CMYK workflow only.
• These options will not be applied in the Native PDF workflow:
o PDF optimization
o Trapping
o Graphics Quality High
o Use protected CMYK values
o Use protected RGB values
o Use protected gray values
o Emulate source paper tint
o CMYK auto rendering intent (Switch to Relative)
o RGB auto rendering intent (Switch to Perceptual)
o Split to booklets
o Font Substitution
• The Diagnostic window does not open and is stuck on test DLLs.
• On the Mac OS, the numbers of copies in Acrobat are mapped to the number of pages on the
CX print server.
• A file submitted with PS Optimization fails in process.
• Nothing happens when you double-click on the Calibration icon and the Calibration wizard does
not open. You must then restart the application in order to open the Calibration wizard.
• Two lines of fold marks on one side of the image are missing.
• Barcode and corner marks are not printed when Duplo DSF-2000 or DC-645 is selected.
• When the CX print server starts up, the test page defaults to tray 1 when the correct paper is
loaded in a different tray.
• CX print server does not reestablish a connection after a 127-211 fault. After any printer fault,
you must power-off and power-on both the printer and the CX print server.
• If you are reinstalling software and consistently receive an error message after DVD 2, open
Disk Management in Windows and check if Disk 1 (Partition) is set to basic or dynamic. If the
partition is set to basic, convert it to dynamic.