Specifications

15
4. In the Add Printer window, enter the following information.
• In the Protocol box, type the Line Print Daemon (LPD) protocol.
• In the Address box, type the address of your server.
• In the Queue box, type the full name of the virtual printer that you want to
use with the Print Driver software.
• In the Name box, type the full server name.
• In the Print Using list, select Other.
A validation message appears in the Address and the Name.
5. Go to Library > Printers > PPDS > Contents > Resources > en.lproj.
6. Select either Europe_A4 or US_Letter.
7. Click Open.
8. Click Add.
9. Close the Print Setup Utility (or Print & Fax) window.
The virtual printer is now defined with the PPD file and can be seen in the Printer
list.
To enable the Print Driver software:
1. In the Print & Fax window, double-click the virtual printer.
2. Click Utility.
3. In the Enable Enhanced User Interface list, make sure that On is selected.
4. In the Server Hostname box, type the server name.
5. Click Apply.
Copying the CX700 PPD File to the Macintosh Client Workstation
(Mac OS 9 and Mac OS X)
Before setting up one of the CX print server network printers, you must first copy the
CX700 PPD to your client server.
Note:
If you have already installed the Print Driver software, the CX700 PPD is already
copied. See To install the Print Driver software : on page 14.
1. From the Finder menu bar, select Go > Connect to Server.
The Connect to Server dialog box appears.
2. Locate the desired CX print server in the network and then double-click it.
3. In the Connect to Server dialog box, select Guest.
4. Click Connect.
5. Select the Utilities volume, and click OK.
6. If the folder does not automatically appear, double-click the Utilities volume
icon.
7. Double-click the PPD folder.
8. Double-click the desired language folder.