Specifications

14 CX Print Server Quick Connect Guide
Setting Up the Print Driver Software (Mac OS X 10.4 or later)
To install the Print Driver software :
1. From the Go menu, select Connect to Server.
2. In the Server Address box, type your server address, and click Connect.
3. In the Connect as area, select Guest.
4. Click Connect.
5. Select Utilities and click OK.
6. Select the Mac Utilities folder.
7. Double-click CX700_V1_ColorServerPrintDriverInstaller.dmg.
8. Double-click the CX700_V1_ColorServerPrintDriverInstaller file.
9. Click Continue.
10. In the warning message window, click Continue.
11. In the Software License Agreement window, click Continue.
12. Click Agree to agree to the terms and continue with the installation procedure.
13. In the Select Destination window, select the hard disk, and click Continue.
14. Click Install.
15. Type your name (if necessary) and password, and click OK.
16. Click Close.
The Print Driver software is installed.
To define a printer with the Print Driver software:
Have the following information available before performing this procedure:
• Network address of your CX print server
• Name of the virtual printer that you want to use with the Print Driver software
1. From the Go menu, select Utilities.
2. Do one of the following:
• In the Utilities folder, open System Preferences > Print & Fax, for Mac OS X
10.5.
• In the Utilities folder, double-click Printer Setup Utility, for Mac OS X 10.4.
3. Do one of the following:
• Click to add a printer, for Mac OS X 10.5
• In the Print Setup Utility window, click Add, for Mac OS X 10.4