Specifications

8 CX Print Server Quick Connect Guide
4. Select Use the following IP Address.
5. Type the new IP address, Subnet mask and Default gateway (according to the
Network Administrator).
6. If required, enter the DNS server addresses (according to the Network
Administrator).
7. Clic k OK.
8. Click OK in the Local Area Connections Properties window.
9. When prompted to restart your computer, click Ye s .
10. In the Preferences window, click Save.
Configuring the IPv6 Address
The following should only be performed if you need to change the default settings
(see Step 2 for the default settings).
1. In the CX print server workspace, select File > Preferences.
2. Select Network Setup.
3. In the IPv6 area, select IPv6 check box to enable IPv6 addressing.
The following message appears:
“You need to restart the application for the new settings to take effect”.
4. Click OK.
5. Type the new IPv6 address (according to the network administrator).
6. In the Preferences window, click Save.
Configuring the AppleTalk Zone
The following should only be performed if you need to change the default settings
(see Step 2 for the default settings).
1. In the CX print server workspace, select File > Preferences.
2. Select Network Setup.
3. In the AppleTalk setup area, click Change.
The AppleTalk Protocol Properties window appears.
4. From the zone list, select the desired AppleTalk zone for your computer, and
click OK.
5. Click OK.
6. In the Preferences window, click Save.
Configuring IPX Printing
If you have a Novell network running the IPX protocol, install and configure the
Novell
®
client.
Note:
For more detailed information, see the Xerox CX Print Server, Powered
by Creo, for Xerox 700 Digital Color Press Technical Manual (731-01331A-EN)
or the Xerox CX Print Server, Powered by Creo, for Xerox 700 Digital Color
Press User Guide (731-01341A-EN).