Specifications

6 CX Print Server Quick Connect Guide
Step 1: Turning on the CX Print Server
1. Connect the monitor’s AC power cable to an AC power source, and turn on the
monitor.
2. Connect the server’s AC power cable to an AC power source.
3. Push the power control button on the CX print server. See Figure 2 on page 4.
The power indicator on the front panel lights up, and the Windows operating
system starts.
The CX print server splash screen appears followed by the workspace.
A test page is printed on the 700 digital color press.
If the workspace does not automatically appear, click Start and select CX700 >
CX700
.
Step 2: Viewing and Printing the System Configuration
After the initial installation, you can view and print the default settings of the CX
print server to verify the initial settings.
1. In the CX print server workspace, select Info > Configuration View.
The network and system configuration of your CX print server is displayed.
2. To print the configuration details, click Print.
The Page Setup dialog box appears.
Note:
If a power failure occurs while the server is turned on, the server will
restart automatically when power is restored.
Note: When the server is connected to an AC power source but is not
turned on, the operating system does not run, and all core logic is shut
down.