Specifications

4 CX Print Server Quick Connect Guide
External Indicator Lights and Controls
Figure 2 identifies the external indicator lights and controls of your CX print server.
Figure 2: External controls and indicators
The following list describes functions of the external indicator lights and controls:
• Power indicator light: Goes on when you turn on the CX print server and
remains a steady green as long as the printer server is on.
• Disk activity (hard disk) indicator light: Blinks in orange when a hard disk drive
is in use.
• Power control button: Turns the CX print server on and off.
• Reset button: Restarts the CX print server.
• USB port: Connects any USB device to the server.
• Ethernet link status indicator light: Indicates that there is an active connection
on the Ethernet port.
• Ethernet transmit/receive activity indicator light: Indicates that there is activity
between the server and the network.
System and Network Settings
The following table lists the default system and network settings. These are
automatically taken from the press settings:
Power indicator light
Disk activity indicator light
(orange)
Power control button
Reset button
USB port
At rear
Ethernet link status
Ethernet transmit/
receive activity LED
Parameter Default Setting
Server name CX print server (the Server name is taken
from the Computer Name you typed
during the Windows installation. See the
Technical Manual (731-01331A-EN).
Workgroup or Domain WORKGROUP
Languages English