Specifications

REMOTE CONTROL OPERATION
Press CD button first:
SELECT A SPECIFIC TRACK
Press the track numbers at the top, 0 - 9. The number will appear in the display and the
track will begin to play after a short delay. To select tracks 10 and higher press the -/-- key
so that two dashes appear on screen, two digits can then be keyed in.
RANDOM will select random track playback.
INFO toggles CD text display on and off
TIME toggles the time display between Track Elapsed, Track Remaining, CD Elapsed and
CD Remaining Time modes.
REPEAT causes the current track or the whole disc to be repeated. Press the REPEAT
button once and the current track will be repeated. Press REPEAT a second time and the
entire disc will be repeated. Press the REPEAT button a third time and the player will
revert to normal play.
DIM adjusts the display brightness.
FILTER offers 5 optional digital filter shapes. see further FILTER description below.
VOLUME buttons will adjust the volume level provided that the product has been
configured in Pre-Amplifier Mode, see page x.
FUNCTIONS NOT IN USE:
PROGRAM is not enabled yet. Look for future software updates from which may enable
this feature.
PHASE cannot be enabled for the EVOLUTION 50 CD, which uses a double differential DAC
circuit. It is used for other Creek DACs such as the RUBY.
DAC OPERATION
Press DAC button first. The DAC will operate like a digital pre-amp, allowing you to select
a different input for various digital sources. Some digital devices output their signal
optically, so use a good quality TOSLINK cable to pass the signal to the DAC. Some
products use only co-axial connections. Use a dedicated ‘digital interconnect’ for the best
results. Ask your dealer for advice.
The EVOLUTION 50CD can supports digital input signals from 16 to 24 Bit word lengths
and sample rates from 32 kHz to 192 kHz. The incoming signal will be checked and the
sample rate will automatically be displayed.