Datasheet

CLD AP12 REV 8
BINNING & LABELING
Cree
®
XLamp
®
XR-E and XR-C LED
WWW. CREE.COM/XLAMP
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]
TABLE OF CONTENTS
Bin and Order-Code Format ................................ 3
Performance Groups – Brightness ........................ 4
Performance Groups – Chromaticity ..................... 6
Performance Groups – Dominant Wavelength ........ 7
Performance Groups – Forward Voltage. ............... 7
Cree’s Standard Chromaticity Regions Plotted on the
1931 CIE Curve ................................................. 8
Standard Order Codes and Bins
(XR-C Cool White) ............................................. 9
Standard Order Codes and Bins
(XR-C Neutral and Warm White) ......................... 10
Standard Order Codes and Bins
(XR-C Color) .................................................... 11
Standard Order Codes and Bins
(XR-E Cool White)............................................. 12
Standard Order Codes and Bins
(XR-E Neutral White) ........................................ 13
Standard Order Codes and Bins
(XR-E Warm White) .......................................... 14
Standard Order Codes and Bins
(XR-E Color) .................................................... 15
INTRODUCTION
This document describes the product nomenclature
required to select and order Cree’s XLamp XR-E and
XR-C LEDs. XLamp XR-E and XR-C LEDs are tested and
sorted into bins which are then combined into order-
able kits identied by an order code.
All XLamp LEDs are tested and sorted by color and
brightness into a unique bin. Each bin contains LEDs
from only one color and brightness group and is
uniquely identied by a bin code. White XLamp LEDs
are sored by chromaticity (color) and luminous ux
(brightness). Color XLamp LEDs are sorted by domi-
nant wavelength (color) and luminous ux (bright-
ness), or in the case of roal blue, radiant ux (bright-
ness). Amber, red-orange and red LEDs are additionally
binned into forward voltage bins. LEDs are shipped
onreels containing LEDs from one bin and are always
labeled with the appropriate bin code.
Kits contain LEDs from a number of similar bins and
are fully dened by their order codes. A full explanation
of the order codes for each family, as well as a list of
standard order codes, is provided in this document.
Copyright © 2004-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is
not a warranty or a specication. For product specications, please see the data sheets available at www.cree.com. For warranty
information, please contact Cree Sales at [e-mail].