Datasheet

Copyright © 2006-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc.
11 CLD-DS05.011
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]
www.cree.com/xlamp
Mechanical Dimensions (T
A
= 25°C)
All measurements are ±.1mm unless otherwise indicated.
Lens
Reflector
Substrate
Lens
Reflector
Substrate
8.4 mm
5.6 mm 0.7 mm
9.0 mm
7.0 mm6.46 mm
6.8 mm
4.4 ± .2 mm
7.0 mm
5.6 mm 1.2 mm
9.4 mm
7.4 mm
Side View
Top View
Bottom View
Recommended PC Board Solder Pad
7.0 mm
5.6 mm 0.70 mm
8.4 mm
6.46 mm
Recommended PC Board Solder Pad