Datasheet

ManualsBrandsCREE ManualsHighPower-LEDsHighPower LED Neutral white 3 W 111 lm 110 ° 2.9 V 1000 mA

PRODUCT FAMILY DATA SHEET

notice. Cree

, the Cree logo and XLamp

are registered trademarks of Cree, Inc. UL

and the UR logo are registered

trademarks of UL LLC.

CLD-DS83 REV 4A

Cree

XLamp

XQ-E LEDs

PRODUCT DESCRIPTION

The XLamp

XQ-E LED family packs

the lighting-class performance of

the XP-E2 into a package that is 78

percent smaller. The compact XQ-E

LED enables lighting manufacturers



total cost of their LED luminaires,

   



The new XQ-E LEDs open up new

design possibilities for a wide

spectrum of lighting applications

such as portable, indoor directional,

architectural or vehicle lighting. The

XQ-E’s combination of consistent

   

   

color mixing and optical control,

compared to the larger XP-E2 LED.

FEATURES

 Cree’s smallest lighting class

LED: 1.6 X 1.6 X 1.44 mm

 Available in 70- and

80-minimum CRI white, royal

blue, blue, green, PC amber,

red-orange & red

 1 A maximum drive current

 Wide viewing angle: white 110°,

royal blue, blue, green & PC

amber, 125°, red -orange & red

130°

 



 



 

 UL



(E349212)



Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

TABLE OF CONTENTS

Characteristics .......................... 2

Flux Characteristics - White ........ 3

Flux Characteristics - Color ......... 4

Relative Spectral Power

Distribution............................... 6



Temperature ............................. 7

Electrical Characteristics ............. 8

Relative Flux vs. Current ............ 9

Typical Spatial Distribution .........11

Thermal Design ........................12

 .13

Notes ......................................14

Mechanical Dimensions..............16

Tape and Reel ..........................17

Packaging ................................18

Summary of content (18 pages)

PAGE 1
® ® CLD-DS83 Rev 4A Product family data sheet Cree XLamp XQ-E LEDs Product Description FEATURES Table of Contents The XLamp® XQ-E LED family packs • Cree’s smallest lighting class Characteristics........................... 2 the lighting-class performance of LED: 1.6 X 1.6 X 1.44 mm Flux Characteristics - White......... 3 the XP-E2 into a package that is 78 • Available in 70- and Flux Characteristics - Color.......... 4 percent smaller.
PAGE 2
xlamp ® xQ-e leds Characteristics Characteristics Unit Thermal resistance, junction to solder point - white, royal blue, blue °C/W 6 Thermal resistance, junction to solder point - green °C/W 9 Thermal resistance, junction to solder point - PC amber °C/W 8 Thermal resistance, junction to solder point - red‑orange, red Minimum Typical °C/W 5 Viewing angle (FWHM) - white degrees 110 Viewing angle (FWHM) - royal blue, blue, green, PC amber degrees 125 Viewing angle (FWHM) - red‑orange, re
PAGE 3
xlamp ® xQ-e leds Flux Characteristics - White (TJ = 85 °C) The following table provides several base order codes for XLamp XQ-E white LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document. CCT Range Color Min. Max.
PAGE 4
xlamp ® xQ-e leds Flux Characteristics - Color (TJ = 25 °C) The following table provides several base order codes for XLamp XQ-E color LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document. Dominant Wavelength Range Min. Color Group Royal Blue Max.
PAGE 5
xlamp ® xQ-e leds Flux Characteristics - Color (TJ = 25 °C) - Continued Color Base Order Codes Min. Luminous Flux (lm) @ 350 mA Color Bin PC Amber Y2 Group P4 80.6 XQEAPA-00-0000-000000901 P3 73.9 XQEAPA-00-0000-000000801 Dominant Wavelength Range Min. Color Group RedOrange Max. DWL (nm) O3 610 Group DWL (nm) O4 620 Dominant Wavelength Range Min. Color Group Red R2 Max. DWL (nm) 620 Group R3 Order Code Flux (lm) @ 25 °C* DWL (nm) 630 Base Order Codes Min.
PAGE 6
xlamp ® xQ-e leds Relative Spectral Power Relative Spectral Power Distribution Relative Radiant Power (%) 100 80 60 Cool White Warm White 40 20 0 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Spectral Power Relative Radiant Power (%) 100 80 Royal Blue Blue 60 Green PC Amber 40 Red-Orange Red 20 0 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright © 2013-2015 Cree, Inc. All rights reserved.
PAGE 7
xlamp ® xQ-e leds Relative Flux Output vs. Junction Temperature Relative Flux vs. Junction Temperature (IF = 350 mA) Relative Luminous Flux (%) 120 100 80 60 White 40 20 0 25 50 75 100 125 150 Junction Temperature (ºC) Relative Flux Output vs. Junction Temperature 100 Relative Radiant Flux (%) 90 80 70 60 50 Royal Blue 40 30 20 10 0 25 50 75 100 125 150 Junction Temperature (ºC) Copyright © 2013-2015 Cree, Inc. All rights reserved.
PAGE 8
xlamp ® xQ-e leds Relative Flux Output vs. Junction Temperature Relative Flux vs. Junction Temperature (IF = 350 mA) - Continued Relative Luminous Flux (%) 100 90 80 70 Blue 60 Green 50 PC Amber 40 Red-Orange 30 Red 20 10 0 25 50 75 100 125 150 Junction Temperature (ºC) Electrical Characteristics (Tj = 85ºC) Electrical Characteristics (TJ = 85 °C) Forward Current (mA) 1000 800 600 White 400 200 0 1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.
PAGE 9
xlamp ® xQ-e leds Electrical Characteristics (Tj = 85ºC) Electrical Characteristics (TJ = 25 °C) Forward Current (mA) 1000 800 Royal Blue, Blue 600 Green PC Amber Red-Orange, Red 400 200 0 1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70 Forward Voltage (V) Relative Intensity vs. Current (Tj = 85ºC) Relative Flux vs.
PAGE 10
xlamp ® xQ-e leds Relative Relative Flux vs. Intensity Current (TJvs. = 25Current °C) (Tj = 85ºC) Relative Radiant Flux (%) 250 200 150 Royal Blue 100 50 0 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Relative Intensity vs. Current (Tj = 85ºC) Relative Luminous Flux (%) 300 250 Blue 200 Green PC Amber 150 Red-Orange Red 100 50 0 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Copyright © 2013-2015 Cree, Inc.
PAGE 11
xlamp ® xQ-e leds Typical Spatial Radiation Pattern-white Typical Spatial Distribution Relative Luminous Intensity (%) 100 80 60 White 40 20 0 10 90 Typical Spatial Radiation Pattern-royal blue, blue,30green,50amber,70red-orange, red Angle (º) -90 -70 -50 -30 -10 Relative Luminous Intensity (%) 100 80 Royal Blue, Blue, Green 60 PC Amber 40 Red-Orange, Red 20 -90 -70 -50 -30 -10 0 10 30 50 70 90 Angle (º) Copyright © 2013-2015 Cree, Inc. All rights reserved.
PAGE 12
xlamp ® xQ-e leds Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to Thermal Design - white ambient in order to optimize lamp life and optical characteristics.
PAGE 13
xlamp ® xQ-e leds Reflow Soldering Characteristics In testing, Cree has found XLamp XQ-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
PAGE 14
xlamp ® xQ-e leds Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products.
PAGE 15
xlamp ® xQ-e leds Notes - Continued Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright © 2013-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
PAGE 16
6 5 5 6 4 4 5 3 3 4 2 3 xlamp ® xQ-e leds 2 1 2 REVISONS REVISONS NOTICE NOTICE AL. THIS AND THE INFORMATION AND THEPLOT INFORMATION ONFIDENTIAL. THIS PLOT AND THE INFORMATION N ARE THE PROPRIETARY AND OPRIETARY AND NED WITHIN ARE THE PROPRIETARY AND ORMATION OF CREE, FENTIAL CREE, INC. THIS PLOTINC. INFORMATION OF THIS CREE,PLOT INC.
PAGE 17
INFORMATION RY AND C. THIS PLOT ISCLOSED TO ANY RITTEN CONSENT REV BY DESCRIPTION DATE APP'D xlamp ® xQ-e leds D Tape and Reel All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. All dimensions in mm. Measurement tolerances unless indicated otherwise: .xx = .25 mm, .xxx = .125 mm 1.500 +.10 4.0 -.00 ±.1 4.000 1.5 ±.1 CATHODE SIDE 1.75 ±.10 12.0 C 8.0 ±.1 A 2.5 ±.1 1.750 Cathode Side 1.65 8.000 NOMINAL 8.30 MAX +.3 .0 1.85 1.000 2.
PAGE 18
xlamp ® xQ-e leds Packaging The diagrams below show the packaging and labels Cree uses to ship XLamp XQ-E LEDs. XLamp XQ-E LEDs are shipped in tape loaded on a reel. Each box contains only one reel in a moisture barrier bag. Copyright © 2013-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.