Datasheet

Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, the Cree logo and XLamp
®
are registered
trademarks of Cree, Inc.
2
xlamp
®
xQ-B led
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point °C/W 17
Viewingangle(FWHM) degrees 140
Temperaturecoefcientofvoltage mV/°C -2.0
ESDclassication(HBMperMil-Std-883D) Class 1
DC forward current mA 80 300
Reverse voltage V -5
Forward voltage (@ 80 mA, 25 °C) V 3.0 3.4
LED junction temperature °C 150
FLUX CHARACTERISTICS (T
J
= 25 °C)
The following table provides several base order codes for XLamp XQ-B LEDs. It is important to note that the base order
codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as
a complete description of the order-code nomenclature, please consult the XLamp XQ LED Family Binning and Labeling
document.
Color
CCT Range
Base Order Codes
Minimum Luminous
Flux @ 80 mA
Calculated
Minimum
Luminous Flux
(lm)*
Order Code
Min. Max. Group Flux (lm) 150 mA
Cool White 5000 K 8300 K K2 30.6 52.5 XQBAWT-00-0000-00000L051
Neutral White 3700 K 5000 K
K2 30.6 52.5 XQBAWT-00-0000-00000H0E5
J3 26.8 46 XQBAWT-00-0000-00000HXE5
Warm White 2600 K 3700 K J3 26.8 46 XQBAWT-00-0000-00000HXE7
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy)
measurements and ±2 on CRI measurements. See the Measurements section (page 7).
• Typical CRI for Neutral White, 3700 K - 5000 K CCT is 75.
• Typical CRI for Warm White, 2600 K - 3700 K CCT is 80.
• Minimum CRI for 70 CRI Minimum Cool White is 70.
• Minimum CRI for 80 CRI Minimum White is 80.
* Calculateduxvaluesat150mAareforreferenceonly.
2