Datasheet

XLAMP XM-L EASYWHITE LEDS
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
of Cree, Inc.
12
Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
and EasyWhite is a trademark of Cree, Inc. This is a preliminary, non-binding product specication provided for informational purposes only and is subject to change without notice.
This product is unreleased and is provided “as is” without warranty.
12
BIN AND ORDER CODE FORMAT
Bin codes and order codes are congured as follows:
Order Code Bin Code
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp XM-L LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed
below. As a general guideline, Cree recommends that users follow the recommended soldering prole provided by the
manufacturer of solder paste used.
Note that this general guideline may not apply to all PCB designs and congurations of reow soldering equipment.
SSSCCC-BB-HHHH-NNNNNNNNN
Series
XML = XM-L
Internal code
Internal code
Kit code
Vf class: B = 6-V class
D = 12-V class
Reel size
0 = 1000 (standard)
Color
EZW = EasyWhite
SSSCCC-BB-WWW-FF-GAAAAAA
Series
XML = XM-L
Internal code
Flux bin
Internal code
Vf class: B = 6-V class
D = 12-V class
Chromaticity bin
Color
EZW = EasyWhite