Datasheet
xlamp
®
xm-l Color leds
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
of Cree, Inc.
2
Copyright © 2012-2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, the Cree logo and XLamp
®
are registered
trademarks of Cree, Inc.
2
CHARACTERISTICS - COMPLETE PACKAGE
The following table lists the product characteristics for the XLamp XM-L Color LED package, measured with all LED dies
on simultaneously and each LED die connected to independent drive circuits at 350 mA.
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point °C/W 3.5
Viewing angle (FWHM) degrees (°) 130
ESD withstand voltage (HBM per Mil-Std-883D) V 8000
LED junction temperature °C 150
CHARACTERISTICS - PER LED DIE
The following table lists the product characteristics for each LED die within the XLamp XM-L Color LED package.
Characteristics Unit Minimum Typical Maximum
Temperature coefcient of voltage - red mV/°C -1.8
Temperature coefcient of voltage - green mV/°C -4
Temperature coefcient of voltage - blue, white mV/°C -3
DC forward current - red, green, blue, white mA 1000
Forward voltage (@ 350 mA, 25 °C) - red V 2.25 2.6
Forward voltage (@ 350 mA, 25 °C) - green V 3.3 3.9
Forward voltage (@ 350 mA, 25 °C) - blue, white V 3.1 3.7