Datasheet

Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]
CLD-AP44 REV 1
BINNING & LABELING
Cree
®
XLamp
®
XM-L LED
WWW.CREE.COM/XLAMP
Copyright © 2010-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes
only and is not a warranty or a specication. For product specications, please see the data sheets available at www.cree.com.
For warranty information, please contact Cree Sales at [e-mail].
TABLE OF CONTENTS
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]
INTRODUCTION
This document describes the product nomenclature re-
quired to select and order Cree’s XLamp XM-L LEDs.
XLamp XM-L LEDs are tested and sorted into bins which
are then combined into orderable kits identied by an
order code.
All XLamp LEDs are tested and sorted by color and
brightness into a unique bin. Each bin contains LEDs
from only one color and brightness group and is uniquely
identied by a bin code. White XLamp LEDs are sorted
by chromaticity (color) and luminous ux (brightness).
LEDs are shipped on reels containing LEDs from one bin
and are always labeled with the appropriate bin code.
Kits contain LEDs from a number of similar bins and are
fully dened by their order codes. A full explanation of
the order codes for XLamp XM-L LEDs, as well as a list
of standard order codes, is provided in this document.
Bin and Order-Code Format .................................. 2
Performance Groups – Brightness .......................... 2
Performance Groups – Chromaticity ....................... 3
Cree’s Standard Chromaticity Regions
Plotted on the 1931 CIE Curve .............................. 6
Standard Order Codes and Bins
(XM-L ANSI Cool White) ................................... 7
(XM-L ANSI Neutral White) ............................... 7
(XM-L ANSI Warm White) ................................. 8