Datasheet

Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the
Cree logo and XLamp are registered trademarks of Cree, Inc.
2 CLD-DS23.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]
www.cree.com/xlamp
Flux Characteristics (T
J
= 25°C)
The following table provides several base order codes for XLamp MX-6 LEDs. It is important to note that the base order
codes listed here are a subset of the total available order codes for the product family. For more order codes, as well
as a complete description of the order-code nomenclature, please consult the XLamp MX-6 LED Binning and Labeling
document.
Color
CCT Range
Base Order Codes
Min Luminous Flux
(lm) @ 300 mA
Calculated
Min Luminous
Flux (lm)
@ 350 mA*
Order Code
Min. Max. Group Flux (lm) Flux (lm)
Cool White 5,000 K 8,300 K
Q4 100 114 MX6AWT-A1-0000-000C51
Q5 107 122 MX6AWT-A1-0000-000D51
Warm White
3,700 K 4,300 K Q3 93.9 107 MX6AWT-A1-0000-000BE5
2,900 K 3,200 K P4 80.6 92 MX6AWT-A1-0000-0009E7
* Calculated values for reference purposes only.
Notes:
• Cree maintains a tolerance of +/- 7% on ux measurements.
• Typical CRI for Cool White (4,300 K – 8,300 K CCT) is 75.
• Typical CRI for Warm White (2,600 K – 4,300 K CCT) is 80.
Characteristics
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point °C/W 5
Viewing angle (FWHM) degrees 120
Temperature coefcient of voltage mV/°C -3.3
ESD classication (HBM per Mil-Std-883D) Class 2
DC forward current mA 350
Forward voltage (@ 300 mA) V 3.3 3.8
LED junction temperature °C 150