Datasheet
XLAMP
®
MX-3 LEDS
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
of Cree, Inc.
2
Copyright © 2010-2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, the Cree logo and XLamp
®
are registered
trademarks of Cree, Inc.
222
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point °C/W 11
Viewing angle (FWHM) degrees 120
Temperature coefcient of voltage mV/ °C -2.7
ESD classication (HBM per Mil‑Std‑883D) Class 2
DC forward current mA 500
Reverse voltage V -5
Reverse current mA -0.1
Forward voltage (@ 350 mA) V 3.7 4.0
LED junction temperature °C 150
FLUX CHARACTERISTICS (T
J
= 25 °C)
The following table provides several base order codes for XLamp MX-3 LEDs. It is important to note that the base order
codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as
a complete description of the order‑code nomenclature, please consult the XLamp MX Family LED Binning and Labeling
document.
Color
CCT Range
Base Order Codes
Min. Luminous Flux
(lm) @ 350 mA
Calculated
Min. Luminous
Flux (lm)
@ 300 mA*
Order Code
Min. Max. Group Flux (lm) Flux (lm)
Cool White 5000 K 8300 K
R2 114 100 MX3AWT-A1-0000-000E51
Q5 107 93.9 MX3AWT-A1-0000-000D51
Warm White
3700 K 4300 K Q4 100 87 MX3AWT-A1-0000-000CE5
2600 K 3700 K Q3 93.9 82 MX3AWT‑A1‑0000‑000BE7
* Calculated values for reference purposes only.
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy)
measurements and ±2 on CRI measurements. See the Measurements section (page 7).
• Typical CRI for Cool White (4300 K – 8300 K CCT) is 75.
• Typical CRI for Warm White (2600 K – 4300 K CCT) is 80.