Datasheet
Copyright © 2010, 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc.
2
XLAMP ML-E LEDS
FLUX CHARACTERISTICS (T
J
= 25°C)
The following table provides several base order codes for XLamp ML-E LEDs. It is important to note that the base order
codes listed here are a subset of the total available order codes for the product family. For more order codes, as well
as a complete description of the order-code nomenclature, please consult the XLamp ML-E LED Binning and Labeling
document.
Color
CCT Range
Base Order Codes
Min Luminous Flux
(lm) @ 150 mA
Order Code
Min. Max. Group Flux (lm)
Cool White 5.000 K 8,300K
M3 45.7 MLEAWT-A1-0000-000351
N2 51.7 MLEAWT-A1-0000-000451
Warm White
3,700 K 4,300 K
M2 39.8 MLEAWT-A1-0000-0002E5
M3 45.7 MLEAWT-A1-0000-0003E5
2,800 K 3,200 K
K3 35.2 MLEAWT-A1-0000-0001E7
M2 39.8 MLEAWT-A1-0000-0002E7
Notes:
• Cree maintains a tolerance of +/- 7% on ux measurements.
• Typical CRI for Cool White (4,300 K – 8,300 K CCT) is 75.
• Typical CRI for Warm White (2,600 K – 4,300 K CCT) is 80.
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point °C/W 11
Viewing angle (FWHM) degrees 120
Temperature coefcient of voltage mV/°C -3
ESD classication (HBM per Mil-Std-883D) Class 2
DC forward current mA 150 500
Reverse voltage V 5
Forward voltage (@ 150 mA) V 3.2 3.4
LED junction temperature °C 150