User manual

3 CLD-AP20 Rev. 3
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]
www.cree.com/xlamp
This document is provided for informational purposes only and is not a warranty or a specication. For product specications,
please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [e-mail].
Copyright © 2008-2209 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo, and XLamp are registered trademarks of Cree, Inc.
Bin and Order-Code Format (Color)
Bin codes and order codes are congured in the following manner:
SSSGCC-BD-HHHH-NNNMMMKKK
Package configuration
Number of chips
Color
CT = Red, Green, Blue, White
Dominant wavelength bin for each die (RGB)
Chromaticity bin for white die
Optical characteristics
A: Individually addressable (all anodes on same side)
2 = Lambertian
Series
MCE = MC-E
Flux bin for each die (RGBW)
Internal code
4 = 4 chips
SSSGCC-BD-HHHH-NNNNNNNNN
Package configuration
Number of chips
Color
CT = Red, Green, Blue, White
Internal code
Flux kit
Optical characteristics
A: Individually addressable (all anodes on same side)
2 = Lambertian
Series
MCE = MC-E
Internal code
Dominant wavelength kit (RGB)
Chromaticity kit for white
4 = 4 chips
Bin Code
Order Code