Instructions / Assembly

March 2, 2015
programmed to automatically turn on specific lights and open your shades
when you unlock the door.
SmartThings Users: Yes. After connecting a Connected Cree LED Bulb to
your SmartThings
®
Hub you'll be prompted to choose how you want to use the
bulb. One of those choices is to group devices, switches or bulbs together so
that your devices can be controlled together.
17. I already have a hub with a competitor’s connected bulbs installed. Will
Connected Cree
®
LED bulbs work on the same hub?
Yes, you can add Connected Cree
®
LED bulbs to work along with other
connected bulbs on your existing Wink Hub or SmartThings
®
Hub.
18. Where can I purchase additional bulbs?
The Connected Cree
®
LED bulb is currently available in store and online at
The Home Depot
®
. Additional retailers may be found at www.creebulb.com.
19. How far away from home can I be and still control my lights?
As long as you have an internet connection on your Smartphone, you can
remotely control your Connected Cree
®
LED bulbs from almost anywhere in
the world.
20. I cannot get my Connected Cree
®
LED bulb to successfully pair with my hub.
What should I do?
If you have successfully set up your compatible hub, but cannot get a
Connected Cree
®
LED bulb to pair with the hub in the applicable app, you can
factory reset your bulbs. To do this, install your bulb in a light fixture and turn
it on. (For best results we recommend installing the bulb where you can turn
the power off at a wall switch.) Turn the light switch on and off at two second
intervals until the light blinks once to indicate it has reset. This should happen
at the 4
th
full on-off cycle. You can then turn the light off and pair the bulb
with your hub via the mobile App.
21. My internet is down; can I still control my lights?
If your internet connection is down, then the Connected Cree
®
LED bulbs
cannot be controlled via the App. However, the bulbs can still be turned on
and off at the wall switch as needed.
22. How secure are my Connected Cree
®
LED bulbs when paired with the Wink
Hub?