Instructions for Installation and Use Electric Hob Model S930E To the Installer Before installation fill in the product details on the back cover this book. The information can be found on the rating plate. To the User You must read the instructions prior to installing and using the appliance and then retain them for future reference.
You have just purchased a glass ceramic hob featuring halogen and radiant cooking zones. You will now be able to benefit from the four assets of halogen cooking: • Top performance - The infrared radiation ensures the immediate transmission of heat. The rapid rise in temperature and the poor thermal inertia of the halogen cooking zones allow for guaranteed control flexibility. • Comfort - Halogen cooking ensures the same visual comfort as gas cooking.
Hob description This hob is fitted with: 1. one "Haloring" halogen cooking zone with circular lamps: • on the back left, 2500W - Ø 230 mm, 3 "Quickring" radiant cooking zones: • on the back right, one 1500W zone - Ø 180 mm, • on the front left, one 1200W zone - Ø 165 mm, • on the front right, one 1800W zone - Ø 145 mm. i.e. for a total power of 7000W. 2.
The controls Turning on the hob Place your finger on key to turn the hob on. The power on indicator light to the left of the key lights up. Then enable the control panel: press the key for 2 seconds, and the indicator light beside it will come on: you can now control the cooking zones. Cooking zone control Each cooking zone is controlled by a set comprising two parts: • a top part, • a lower part.
Using the cooking zones The "Haloring" cooking zone comprises a circular halogen lamp for the optimum distribution of the heat radiated. Its properties are similar to those of gas burners, making it ideal for quick frying over a high flame, frying and all other cooking processes requiring a rapid rise in temperature. The "Quickring" radiant cooking zone comprises several coils that guarantee the distribution of the heat over the bottom of the cookware.
Maintenance and useful tips Maintenance Turn the hob off by pressing the key. Should you accidentally press the ON/OFF key and turn the hob back on during cleaning, turn it off immediately. The vitroceramic glass used for the heating surface is smooth and poreless and it is also resistant to thermal shocks and to mechanical shocks under normal conditions of use.
Technical information for the fitter Recommendations • • • • • • When you have removed the packing, check whether the appliance is intact. If you have any doubts, contact a qualified professional before using the appliance. Never leave the packing components (plastic bags, polystyrene foam, nails, etc.) within the reach of children since these are a source of potential danger.
Technical information for the fitter REAR SPRING ASSEMBLY FRONT OF THE HOB UNIT WORK SURFACE 30 REAR RIGHT MOUNTING 40 REAR LEFT MOUNTING HOB UNIT FAST DOWN FRONT LEFT MOUNTING FRONT RIGHT MOUNTING SEAL MOUNTING FRONT / REAR RIGHT / LEFT MOUSSE 5x8 mm Electrical connection • The electrical safety of this appliance can only be guaranteed if the latter is correctly and efficiently earthed, in compliance with regulations on electrical safety.
Technical information for the fitter Electrical connection L BR Supply voltage Fuses 230 V - 1 + N ~ 50 Hz 25 A* 3 x 2,5 mm² N BL BR = Brown, BL = Blue * Application of the simultaneity coefficient in accordance with EN335-2-6 Norm Type Y connection in accordance with EN335-2-6 Norm This appliance conforms with the following European Community Directives: • 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments; • 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent amendments
- 10 -
- 11 -
Key Contacts After Sales Service Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in both the appliances and services we offer. Repair Service and Information Desk UK: 08709 066 066 (Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays) www.theservicecentre.co.
