Technical information

4 5
www.credaheating.co.uk www.credaheating.co.uk
Creda Heating – Design application support
Our team of consultants will provide a clear and detailed specification
of the products required for each property, together with a clear and
simple summary of the total products for the project.
To take advantage of this service, simply complete the form on page 5
and send with a set of plan and elevation drawings to:
Creda Design
Millbrook House
Grange Drive
Hedge End
Southampton
SO30 2DF
Alternatively, information can be emailed to
[e-mail]
If you only need to know how much heat you need for one or two
rooms please use our sizing table on page 47 which will give you
an indication of the kilowatt loading required for a specific room.
Alternatively we have an on-line calculator, which can be found at
www.credaheating.co.uk*
Part L
In recent times, the proliferation of environmental legislation and
ongoing revisions to the Building Regulations, all designed to reduce
carbon intensity and improve energy efficiency, have made the design
process more complex. However, we are able to offer advice on this
as well.
Please see pages 6 and 7 for an overview of how to comply with
the main regulation affecting heating – Part L. However, if you need
specific advice on a project please speak to one of our heating design
consultants or your Creda regional manager.
Creda on the Web
All of the information contained in this brochure is also available on
our website www.credaheating.co.uk.
In addition to standard product information, you will also find details
of wholesalers and contractors who sell and install the Creda Heating
range, installation and operating instructions, brochure downloads,
online heating calculator and a wealth of other self help information.*
Design application support
Application design
We have over 40 years experience in designing and supporting electrical heating
installations. We are able to offer an expert application design service for all our
products, helping new and existing customers alike to specify Creda products into real
buildings and live projects, either off-plan, commenced new-build or refurbishments.
Scheme No. (GD only) Fax back to: 01489 773067
Completed form to be returned to Design Department: Creda NOBO,
Millbrook House, Grange Drive, Hedge End, Southampton SO30 2DF
Please note: We are unable to complete the scheme unless full name and address details are included
Company Telephone
Address Fax
Email
Contact
Site name
Address
Heating design request form
Type of property (for a flat, please tick ‘semi detached’ unless there are other flats on both sides, in which case, tick ‘terrace’)
House Bungalow Flat Other (please specify) _____________ Detached Semi-detached Terraced
Type of construction
Cavity wall Yes No With insulation Yes No Solid walls Yes No Floor Solid Timber Roof Pitched Flat
Insulation None 100mm 150mm 200mm Glazing Single Double Approximate age of the property
Products to be specified
Please list below the product ranges you would like us to base the scheme on. Alternatively leave blank and we will match the right products to your property.
Type/usage of room
(ie living room)
Area (m
2
) Floor to
ceiling
height
External
wall
length
Window
area (m
2
)
External
door area
(m
2
)
Internal
wall
length to
unheated
areas
Is room
above
heated?
Roof
above?
Open
fireplace?
Please include a scaled/sketched drawing showing the relative position of the rooms.
Details
*Updated website due to go live autumn 2010.