Technical information

Commercial space heating –SolFan
44
SolFan
High level fan heater
Key features
• Compact design for smaller installations
Multi-angle bracket with single screw locking for easy
airflow adjustment
• Thermostatic temperature control as standard
• Air circulation mode for summer use
• Wall remote control with thermostat supplied as standard
• Red neon indicating heater energised
Technical Specification
Flexible Adjustment
• Nylon heater case
• Axial fan
• Thermostat range 5°C - 35°C
• Wire strung element
• Grey nish
• Protection – Electrical reset
• Supply – 230V AC single phase
Width Depth
Height
120°
40°
www.credaheating.co.uk
Commercial space heating – SolScreen
45
SolScreen
Warm air curtains
Technical Specification
• Tangential blower
• Wire stitched element
• Powder coated steel body white/black
• Protection – electrical reset
• Supply – 230/240V AC single phase
Width
Depth
Height
Width
Depth
Ceiling
Wall
Height
www.credaheating.co.uk
Controls
Thermostatic controller (included). For remote
switching on/off and variable thermostatic control.
Product selector
Model Rating (kW) Noise level @1m (dBA) Height (mm) Width (mm) Depth (mm)
CSF3 3kW 24 378 230 226
Remote - - 60 170 102
Key features
3kW or 4.5kW models available
• Full heat, half heat and fan modes
• CSS3 can be set to output 3kW or 1.5kW
• CSS45 can be set to output 4.5kW or 2.25kW
• Fan only mode for summer air circulation
• Can be xed to the ceiling or wall mounted using the included bracket
• Bracket allows adjustment over air direction
• Central front panel switches for clear indication of operation mode
• Quiet running motor
Controls
Operation is clear to see with front
mounted controls.
Product selector
The SolFan is a rapid response fan heater designed
for heating in smaller commercial installations and
can be used for air circulation in summer.
The SolScreen range provides a welcoming
flow of warmed air close to open entrances
and is often chosen to help encourage
shoppers in through open entrances.
Model Rating (kW) Recommended Mounting Height (m) Height (mm) Width (mm) Depth (mm)
CSS3 3 1.8 - 2.25 214 605 135
CSS45 4.5 1.8 - 2.25 214 605 135