Technical information

Mechanical panel heaters & electric storage heating – TSR Supaslim Combi
28
TSR Supaslim Combi
Combi storage heaters
Key features
• Combines economic tariff rate storage heater with a fast and responsive
Warmflow fan heater for instant room heating
• The slimmest storage combination heater available
• Sensamatic fully automatic storage heater output ensures room
comfort levels are maintained throughout the day without user
intervention
• The Warmow fan heater has manually adjustable room temperature
sensing thermostatic control accurate to within 0.5°C
• Quiet, low velocity Warmow fan
• All controls are concealed behind a lockable ap
• Hydraulic input charge control thermostat provides auto-set input
charge control
• Fan heater ratings can be set on full or half load (installation option)
• Automatic fan heater switch-off during off-peak tariff periods
(installation override option)
www.credaheating.co.uk
29
Technical Specification
• Elements (storage) – mineral insulated stainless steel sheathed
• Insulation – opacied silicaceous aerogel and mineral bre mat
• Storage core – high density iron oxide compound
• Fan unit – crossow
• Controls – hydraulic head temperature compensated, room and
storage core temperature sensitive, auto-set charge control
• Protection – two level thermal safety overheat
• Supply – 230/240V AC single phase
Width
Depth
Height
www.credaheating.co.uk
Product selector
Mechanical panel heaters & electric storage heating – SFHA Sensair Automatic
SFHA Sensair Automatic
Storage fan heaters
Key features
• Combines electric storage heating, direct acting heating and fanned
heat output with simple controls
• Fully automatic heat storage – no user adjustment required on
input controls
• High performance insulation works more effectively than a conventional
storage heater
• Heat output is via a quiet two speed fan
• Boost setting for high speed room heat up
• Fan can be switched off without altering thermostat setting
• Operates on virtually any tariff and takes better advantage of extended
or split tariffs
• Fanned heating avoids heat stratication
• Lockable controls cover
• Negative pressure air movement through the storage core avoids
hotspots and heat leakage
• Fan operation can be controlled by an external timer, such as
the RFRTK7
Technical Specification
• Elements (storage) – mineral insulated stainless steel sheathed
• Insulation – opacied silicaceous aerogel and mineral bre mat
• Storage Core – high density iron oxide compound
• Fan Unit – two speed crossow fan
• Controls (Output) – regulated by fan, activated by integral
adjustable thermostat
• Controls (Input) – hydraulic head temperature compensated, room
and storage core temperature sensitive, auto-set charge control
• Protection – two level thermal safety overheat
• Supply – 230/240V AC single phase
Width
Depth
Height
Control options
RFRTK7 RF remote thermostat and programmer kit.
Enables programmable time and temperature control using wireless
signalling between the remote wall mounted thermostat and the
receiver unit at the appliance.
The incorporation of high performance insulation means that
stored heat is effectively retained by the heater, meaning that
more useful heat is available for later in the day. The heat output
is then regulated by a simple, thermostatically controlled fan
providing economical heat when and where you want it.
Product selector
Model Rating Direct Charge Acceptance Number Number Remaining Useful Heat Height (mm) Width (mm) Depth (mm) Weight (kg)
Storage (kW) Acting (kW) (7 hrs) (kWh) of Elements of Core Bricks After 17hrs (Static)
Discharge (Fan off) (%)
SFHA18AW 2.5 1.5 17.6 3 12 40 705 788 187 121
SFHA24AW 3.4 1.5 23.5 4 16 40 705 1016 187 158
The Supaslim Combi heater is designed to combine economic and low-cost
storage heating with an independently thermostat-controlled fan heater.
Effectively two heaters in one, the built-in fan can provide heat on its own or
in combination with the storage heater for a rapid boost to room temperature.
Model Rating Direct Charge Acceptance Number Number Height (mm) Width (mm) Depth (mm) Weight (kg)
Storage (kW) Acting (kW) (7 hrs) (kWh) of Elements of Core Bricks
TSR12ACW 1.7 1/0.5 11.8 2 8 760 560 170 78
TSR18ACW 2.5 1.5/0.75 17.6 3 12 760 788 170 114
TSR24ACW 3.4 2/1 23.5 4 16 760 1016 170 149
Able to operate on virtually any tariff and with two and a half
times greater insulation levels than conventional storage
heaters, the SFHA achieves higher SAP and NHER ratings than
manual input storage heaters. The ultimate combination.