Technical information

Advanced control heating systems – Control options
22
Control options
Wall mounted controller for 4 zone pilot wire linked heating system
www.credaheating.co.uk
Advanced control heating systems – Control options
23
www.credaheating.co.uk
Pilot Wire Controller
Model PW E4ZC
Eco-Response Storage
Radiant Heaters
Newera Style Electronic
Panel Heaters
Newera Electronic
Panel Heaters
Contour100 Electronic
Panel Heaters
Pilot wire signalling – ideal control system
option for new build applications
4 zone wall mounted central controller –
mains powered with 4hr backup
Number of heaters – up to 20 in the
same zone
Controller features:
TIME – individual 7 day programming of
multiple time periods MODES – on/off, comfort/
setback or comfort/frost. Also with manual
override selection and holiday functions
Panel Heater features – integral electronic
thermostat for comfort temperature selection
with a xed 5ºC setback from comfort, and
frost protection at 5ºC
Online towel rails feature – integral
thermostat for comfort temperatures, fixed
3-4ºC setback from comfort and frost at 7ºC.
Also has manual override, 2hr boost and
thermostat range restriction options
TPRIII E Electronic
Panel Heaters
Outline Thermostatic
Towel Rails
Plug-in 7 day heater module for single zone pilot wire linked system
7 Day Timer
Pilot Wire
Model TPR E7DT
Contour100 Electronic
Panel Heaters
Pilot wire signalling – ideal control system
option for new build applications
Single zone plug-in module controller –
mains powered by panel with 12hr backup
Number of heaters – up to 10 slave panels
pilot wire linked in a single zone
Timer features:
4 on/off time periods for weekdays and 4 for
weekends
Additional features: key lock and ‘advance
to next programme’ functions
TPRIII E Electronic
Panel Heaters
Plug-in 24 hour timer module for single heater control
24 Hour Timer
Model TPR E24T
Contour100 Electronic
Panel Heaters
Single heater control – not system linked
24hr plug-in timer module – mains powered
by panel with 12hr backup
Number of heaters – single heater
control only
Timer features:
4 on/off time periods in 24hr
Additional features: key lock and ‘advance to
next programme’ functions
TPRIII E Electronic
Panel Heaters
Plug-in runback timer module for single heater control
Run Back timer
Model TPR ERBT
Contour100 Electronic
Panel Heaters
Single heater control – not system linked
Runback plug-in timer module – mains
powered by panel
Number of heaters – single heater
control only
Timer features:
on/off fixed runback time from 1/2hr up to a 4hr
period (1/2hr increments selected at installation)
Special function – an alternative selection
that switches from comfort to setback for
an initial 24hr period, then switches to frost
protect mode
TPRIII E Electronic
Panel Heaters
The performance and economy of Creda heating products can be further enhanced by the use of control options best suited
to the type of installation and lifestyle requirements.
Plug-in timer for single zone mains borne panel heating system
MB Programmer
Model MBPRG
MB Receiver
interface
Model MBIF
Mains borne signalling – no additional signal
cabling required ideal for retro fit installations
Single zone plug-in programmer – powered
by panel with battery backup
Number of heaters – any number of panels
each with a receiver interface unit fitted
Controller features – 3 separate time clocks
with hourly on/off period selection over 24hrs.
Each can be allocated to one or more days of
the week
Panel heater features – integral twin linked
electronic comfort and setback thermostats
Newera Style Electronic
Panel Heaters
Newera Electronic
Panel Heaters
Dimensions
86mm
38mm
132mm
240v mains supply
Zone 1 Zone 2
Zone 3 Zone 4
PW E16A Interface unit
Pilot wire heating system
The PW E4ZC central controller allows 7 day programming for comfort
and setback temperature periods of multiple pilot wire linked heaters in
up to four separate zones.
• 4 separate heating zones
• Heater modes – Comfort/Setback, Comfort/Frost or Comfort/Off
• Wall mounted mains powered controller with capacitor back up
(approx. 4hrs)
Note: Pilot wire installations are appropriate for single phase connection only.