Operating instructions

Safety – overheat protection
For your safety, this appliance is tted with a thermal cut-out. In the
event that the product overheats, the cut-out switches the heater off
automatically.
To bring the heater back into operation, remove the cause of the
overheating, then turn off the electrical supply to the heater for a
few minutes. When the heater has cooled sufciently, re-connect the
electrical supply to turn on the heater.
Important Notes
Although this heater is manufactured to comply with the relevant safety
standards, certain types of carpets could become discoloured by the
temperatures under the heater. If you are concerned about this, we
recommend that you contact the carpet manufacturer for guidance.
You may notice some parts of the element appearing to be hotter from
time to time because of the variable airow through the heater. This
does not cause a safety hazard.
The heat outlet grille may become discoloured with use – this is caused
by airborne pollution and is not a fault.
Cleaning and User Maintenance
WARNING – ALWAYS DISCONNECT FROM THE POWER SUPPLY
BEFORE CLEANING THE HEATER.
Do not use detergents, abrasive cleaning powder or polish of any kind
on the body of the heater.
Allow the heater to cool, then wipe with a dry cloth to remove dust
and a damp cloth (not wet) to clean off stains. Be careful not to allow
moisture into the heater.
Recycling
For electrical products sold within the European Community.
At the end of the electrical products useful life it should
not be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling
advice in your country.
After Sales Service
Your product is guaranteed for one year from the date of purchase.
Within this period, we undertake to repair or exchange this product free
of charge provided it has been installed and operated in accordance
with these instructions.
Your rights under this guarantee are additional to your statutory rights,
which in turn are not affected by this guarantee.
Should you require after sales information or assistance with this prod-
uct please go to www.credaheating.co.uk where you will nd our self
help guide by clicking on “Help Centre” or ring our helpdesk on 0844
879 3588 (UK) or 01 842 4833 (R.O.I.).
Spare parts are also available on the website
www.credaheating.co.uk
Please retain your receipt as proof of purchase.
The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC)
EN55014, EN60555-2 and EN60555-3. These cover the essential requirements of EEC Directives 2006/95/EC and 2004/108/EC
CREDA HEATING
MILLBROOK HOUSE
GRANGE DRIVE
HEDGE END
SOUTHAMPTON
SO30 2DF
[c] GDC Group Ltd
All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Creda.
A division of GDC Group Ltd
United Kingdom:
Tel: [phone]
Fax: [phone]
Website: www.credaheating.co.uk
Republic of Ireland:
Tel: [phone]
INCCUK35RG Issue 1