Specifications

Legal notices
Trademark information
www.digikey.com/maxim-industrial 151
Trademark information
μMAX is a registered trademark of Maxim Integrated Products, Inc.
1-Wire is a registered trademark of Maxim Integrated Products, Inc.
ARM9 is a trademark of ARM Ltd.
ARM926 is a trademark of ARM Ltd.
CompactFlash is a registered trademark of SanDisk Corp.
CompoNet is a registered trademark of OMRON Corporation.
DirectDrive is a registered trademark of Maxim Integrated Products, Inc.
Dolby is a registered trademark of Dolby Laboratories.
EMV is a trademark owned by EMVCo LLC. (See EMV Disclaimer.*)
FireWire is a registered trademark of Apple Computer, Inc.
Flash is a registered trademark of Adobe Systems Incorporated.
General Motors and GM are registered trademarks of General Motors Corporation.
HART is a registered trademark of the HART Communication Foundation.
IEEE is a registered service mark of the Institute of Electrical and Electronics Engineers, Inc.
IEEE 1394 is a trademark of the Institute of Electrical and Electronics Engineers, Inc.
IO-Link is a registered trademark of ifm electronic GmbH.
IrDA is a registered service mark of Infrared Data Association Corporation.
LedEngin is a trademark of LedEngin, Inc.
Linux is a registered trademark of Linus Torvalds.
LuxDot is a trademark of LedEngine, Inc.
MAXQ is a registered trademark of Maxim Integrated Products, Inc.
microSD is a trademark of SanDisk Corp.
MICROWIRE is a trademark of National Semiconductor Corp.
Modbus is a registered trademark of Gould Inc.
NovaSensor is a registered trademark GE Infrastructure Sensing, Inc. GE is a registered trademark of
General Electric Company.
*EMVCo approval of the interface module (IFM) contained in this Terminal shall mean only that the IFM has been tested in accordance and for sufficient conformance with the EMV
Specifications, Version 3.1.1, as of the date of testing. EMVCo approval is not in any way an endorsement or warranty regarding the completeness of the approval process or the
functionality, quality or performance of any particular product or service. EMVCo does not warrant any products or services provided by third parties, including, but not limited to, the
producer or provider of the IFM and EMVCo approval does not under any circumstances include or imply any product warranties from EMVCo, including, without limitation, any implied
warranties of merchantability, fitness for purpose, or non-infringement, all of which are expressly disclaimed by EMVCo. All rights and remedies regarding products and services which
have received EMVCo approval shall be provided by the party providing such products or services, and not by EMVCo and EMVCo accepts no liability whatsoever in connection
therewith. (www.maxim-ic.com/legal/emvco_disclaimer.cfm)