Specifications

Security and surveillance
IP cameras
126 Maxim Industrial Solutions
Recommended solutions
Part Description Features Benefits
Video codec
MG2580 H.264 HD codec SoC H.264 and M-JPEG encoding, ARM9 processor,
Ethernet, USB, audio codecs (G.722, AMR, AAC,
MP1/2/3)
Highly integrated system reduces part count,
simplifies design, and reduces camera size
Video decoder
MAX9526 Low-power, high-performance NTSC/
PAL video decoder
Supports all NTSC and PAL standards, true 10-bit
digital processing, 2:1 video input multiplexer
Easy to configure yet flexible for multiple modes of
operation
Audio amplifiers
MAX9860 16-bit mono audio codec 1.8V single-supply operation, mono codec with
programmable digital filter
Provides a complete audio solution in a small 4mm x
4mm TQFN package
MAX9718 Low-cost, mono, 1.4W differential
audio power amplifier
Class AB gives superior THD+N down to 0.002% Simple, high-fidelity solution
Interface protection
ESD protectors
MAX3203E–
MAX3206E
ESD-protection arrays for high-speed
data interfaces
Low (5pF) capacitance; 2-, 3-, 4-, and 6-channel
options; ±15kV ESD protection
Tiny UCSP™ and WLP packages save space
Current-limited USB switch
MAX1946 Single USB switch with autoreset and
fault blanking
3mm x 3mm package, 2.7V to 5.5V supply Selectable active-high/active-low control logic and
shutdown control provide design flexibility for use in
many designs
PoE controllers
MAX5941/
MAX5942
IEEE
�
802.3af-compliant PoE
interface/PWM controllers for
powered devices (PDs)
Single-chip solutions integrate 802.3af PD interface
and PWM; adjustable UVLO allows operation with
legacy PSE systems; surface-mount, 16-pin SO
package
802.3af-compliant PoE power supplies are highly
integrated, minimizing required space while reducing
build cost
MAX5969A/
MAX5969B
IEEE 802.3af/at-compliant PD
interface controllers with integrated
power MOSFET
IEEE 802.3af/at compliant; 100V absolute maximum
rating; simplified wall-adapter interface; thermally
enhanced, 3mm x 3mm, 10-pin TDFN
Simplify design of PDs that draw power from either a
PoE cable or a wall adapter
MAX15000/
MAX15001
Current-mode PWM controllers with
programmable switching frequency
Programmable switching frequency up to 625kHz;
digital soft-start eliminates output-voltage overshoot
and guarantees monotonic rise during power-up;
10-pin µMAX
�
package
Enable the implementation of very small power
supplies for PoE
Power ICs
MAX8667 4-channel PMIC with two step-down
converters and two low-input LDOs
2.6V to 5.5V supply, 1.2A and 600mA step-down
DC-DCs, 3mm x 3mm TQFN, 1.5MHz switching
frequency
High frequency allows for tiny external components,
thereby reducing overall power-supply size
MAX15022 Dual switching DC-DC converter with
dual LDO
500kHz to 4MHz switching frequency, 180° out-of-
phase operation, 5mm x 5mm 28-pin TQFN
Simplifies design, saves space, and reduces cost
MAX8635 Dual 300mA LDO Independent shutdown, low 90mV dropout at 100mA
load
Pin-programmable output voltage makes
configuration easy while providing flexibility for use
across many designs
(Continued on next page)