User guide

DXP DVI Pro and DXP HDMI Series • Matrix Software 91
• Update Firmware — Allows you to replace the firmware that is coded on the switcher
control board (see “Updating the Firmware” on page 84).
• IP Options — Allows you to set options for the IP connection (see “IP Setup,” on
page 78).
• HTML File Manager — Displays a list of HTML files installed on the switcher
and allows you to upload custom files to the switcher from a connected PC (see
“Uploading HTML Files” on page 86).
• Hardware status — Opens the System Status window, which provides an overall
view of the status of the matrix switcher, including the power supply status and
the individual voltages, the internal temperature, the Remote RS232/RS422 port
configuration, the number of IP connections, and the installed and updated firmware
status.
Figure 89. System Status Window
The text color on this screen indicates the following:
• Green — The component is operating properly.
• Red — The component has failed.
• White — The components are not installed.
NOTE: The DXP switchers are not available in custom configurations. Each
model has all available monitored components, such as power supplies,
installed. If you see the white “not installed” indication, the “not installed”
component may have become disconnected during shipment or rough
handling.