User`s manual

Guangzhou Creator electronics Ltd. Co 2012-01 WWW.CREATOR1997.COM
10
User
’
s Manual of WiFi Conference System
10 Unit power recharging ports, with 4 ports for
recharging corresponding to recharging cabinet.
3.3 CR-WiFi6102/4B Functions and
Features
Each conference unit is equipped with
independent IP address;
WiFi transmission technology, strict digital
protection, ensuring the privacy of conference,
avoiding tapping and malignant interference;
Condenser heart-shaped directional MIC, with
dual-color indicator ring, it turns red when giving
speech. Red light flashes if in short of power;
With one-way 3.5mm stereo headset jack,
capable for volume adjustment;
LCD monitor with backlight, displaying MIC
on/off, IP setup, SSID setup, password setup etc
Chairman unit is limited by maximum speaker
number;
Chairman unit is authorized to suspend the
speech in delegate unit;
Chairman unit has privilege to fully control
conference order;
With built-in rechargeable battery supporting
the speech up to 9 hours continuously;
Adopts special 5-cord high-density avionics
Port;
Adopts professional conference MIC, with
screw turning connector for plugging at will;
With feedback suppress function;
3.4 CR-WiFi6102/4B Operation
Instruction
3.4.1 CR-WiFi6102/4B Setup
Wireless conference unit comprises ROUTER
and IP setup. And the Router includes two
components of SSID and PASSWORD. The
following is the instruction in details:
3.4.1.1 ROUTER Setup
SSID setup
Step 1 Access to interface
After correctly connecting the device, press the
ON/OFF key on panel, LCD monitor will display
Startup…., press and hold MIC key to access to
Unit Set Menu screen, ROUTER is displayed on
left in the monitor, and IP at the right. Press
“ ”key to access to router setup menu. Then
SSID will be displayed on the left in the monitor,
and PASSWORD on the right, press“ ” to
access to router SSID setup screen.
Step 2 Setup
After accessing to SSID setup screen, LCD
monitor has default display of WIFI, and the
cursor will appear under the first letter of “W”,
hinting to set up first letter. Use“-” and“+” keys to
move the cursor, press MIC keyboard to confirm
execution.
For example: To set up the 4
th
letter, move the
cursor to letter “I”, press MIC key, then letter
“I” will flash, press “-” and “+” keys to set it up
with value changed in order ranging 0 to 9, a to f
and A to F. Set up the value and press MIC key to
confirm the operation. LCD monitor will display
the value configured. That’s the end of operation.
Likewise, the other values can be configured in
this way. And value is for up to 10 digits. After
configuring SSID, press and hold MIC key, LCD
monitor will display “Set SSID OK”, then SSID
setup is finished. Press any key or wait for 1