User`s manual

Guangzhou Creator electronics Ltd. Co 2012-01 WWW.CREATOR1997.COM
5
User
’
s Manual of WiFi Conference System
With 1-way RJ45 port, for direct connecting
with a wireless AP, or 100M network exchanger
for application in multiple sites.
With 1-way interpretation unit port, for
connecting with maximum 10 interpretation units.
For realizing simultaneous interpretation of 12
languages.
One group of LINE IN ports for connecting with
external audio devices.
Provide one group of MIC remixed output, for
live conference recording along with recording
device.
Support manual adjustment of the bass, treble
and volume
Built-in DSP feedback suppression function
Adopting full-metal case, both the wiring and
case are with intensified grounding, with contact
12kv, air 15kv antistatic capacity.
The host can be installed in a 19-inch standard
cabinet.
2.4 CR-WiFi6101 Panel Key
Operation
For the convenience of management and use,
CREATOR designs navigation panel and LCD
monitor facilitating your operation of system. It
takes simple steps, which is easy to learn.
Instruction of basic operation
Functional key----direction key----ENTER”confirm
key---direction key--- “ENTER”confirm
After setting, system will auto exit if without any
operation for about 10 seconds.
LCD screen instruction
LCD monitor will be kept on for long time before
turning on the host, and display current system
status and operation information with white fonts
and blue background.
Key indicator instruction
When key indicator is in red or flashing, red
indicator flashes for once indicates successful
selection of key function or parameter, and LCD
monitor will display corresponding information.
2.4.1 Operation of MENU Keys
Menu keys operation includes the configuration of
MIC MODE, MIC ACTIVE’S, BASS, TREBLE,
VOLUME, AUDIO DOWN, with following basic
steps.
1 Press “MENU” key, LCD monitor displays first
option “MIC MODE”.
2 Press“ ”or“ ”key to navigate all options in
order. At the meantime, LCD monitor displays
current operation status. Select the option to
configure, press “ENTER” to confirm it.
3 After accessing to parameters setup screen,
press“ ”or“ ” key to more cursor to select the
setup value.
4 Press“ENTER”key to confirm the parameter
selected.
Before exiting setup screen, press
“MENU”key to display the option of last operation,
rather than the first option.
Example:
Configure MIC mode as Normal (quota mode)
with following steps
1 In navigation panel, press “MENU” key to
access to MIC mode to select screen. At the
meantime, indicator will be on for once, and LCD
monitor display relevant information.